How to connect the amplifier to the radio?

Probably, the modern motorist is no longerrepresents his life without a car stereo. Currently, there are a lot of such devices on the market of multimedia devices, everyone can choose a radio tape recorder for every taste and color. But after you bought it, you need to connect the device to your car, and then connect the speaker system. How to connect the amplifier to the radio? Usually such acoustics are connected according to the principle: "application of one speaker to one channel". In addition, there is also a combined way to connect the amplifier in order to ensure that the speakers are properly loaded.

Step one

When asked how to connect an amplifier towe advise you to apply a mixed method of connection. In particular, it is used to build the so-called bridge amplifiers of the radio tape recorder on the machine. This allows you to achieve excellent and high-quality sound of the speakers. Therefore, we will only talk about the mixed form of the compound. These solutions to problems do not require any significant time or money. Moreover, everything that we offer has already been tested in practice by motorists more than once.

The combined method of connection allows you to connect any brand of radio tape recorder with bridge amplifiers, whose power exceeds 20W per speaker.

Models with two- or four-channel amplifiers, whose power is much smaller, are installed on the direct principle: "plug-socket".

Step Two

Combined method may require youconnection of two cables with the input of the "tulip" type. Thanks to this method, you can significantly improve the sound quality of speakers, even if it is the most common low-cost radio. As a rule, they have so-called small-size coaxial loudspeakers installed. They are also called broadband frontal. Due to the low density and rather mediocre acoustics, there may be an overload in the speakers. And this in turn will lead to distortion of the sound, even if the volume of the radio is average.

Step Three

To eliminate these shortcomings, you will need a HPF. In addition, when connecting it is recommended to use sound filters of the first order, in which the universal frequency is 90-16 Hz.

But only the choice of such a wire depends largely on what characteristics not only the head of the audio system, but also its general acoustic design.

Step Four

Use conventional connecting cords withconnector. True, you will need to correctly choose their section. Before this, consult the showroom with the seller so that when the amplifier is connected, the sound does not deteriorate. In short, summarizing all of the above, it can be said that it is not difficult to connect an amplifier to a regular recorder. All the work is that you need to find the right cables, the use of which will not lead to the fact that the sound will lose its quality.

We hope that after reading our instructions, youyou can easily and without problems connect the amplifier to your car radio. And after that you will only have to enjoy the beautiful and high-quality music in your car. Successful trips and pleasant music in your columns!