How to make distribution of Wi-Fi?

The most common way to createwireless network is the use of Wi-Fi technology, but not all computer users know how to make distribution of Wi-Fi. Now we will help you in this matter. Moreover, in order to understand all the technology of wireless networks, it is recommended to read the articles "What is WiFi?" And "How to configure the router?".

Configuring a Network Connection

First you need to set upwireless connection on a computer that will distribute Wi-Fi in a virtual wireless network. To do this, you need to provide general access. The first network connection is automatically configured after the network card is connected to the equipment. It will connect all the computers on the network with the local machine that is distributing the channel. The second connection creates a link between the local network and the Internet connection.

Now, to start distributing Wi-Fi, you need topurchase a special wireless device, which is called a Wi-Fi adapter. It is neither a router nor a router. Allocate two types of such devices, which are divided by the method of connection. The first type of module is connected using USB and it is quite convenient. The second type of adapter is connected via PCI. Its advantage is that it is much easier to connect to a computer.

This method, how to make the distribution of the Internet,It involves the purchase of a Wi-Fi adapter, which allows you to create a wireless point with shared access. After purchasing such equipment, it will need to be connected to the computer and install all necessary drivers and software to work with the device.

Alternative method

If the last method did not fit, how to do itwai-fi hand out then? You can purchase a special Wi-Fi-router, which is a separate network equipment. Using a set of cables that must be bundled with the device, you must connect it to the electricity network and place it at the desired point in the room.

After that, the router will need to connectto a computer via Internet or WAN ports. This is done very simply. Using the network cable that should be included, one end is connected to the computer, and the other to the Wi-Fi device.

After that it will be necessary to configurerouter according to the hardware, fill in all the fields for the URLs and IP addresses of the equipment, bind the computers to the server, save the settings and restart the router. If you disconnect the network cable from the laptop after connecting through a wireless connection, you should have access to the Internet.