How to connect a digital receiver?
Watch the video
Today digital receivers can be bought in any store of electronic and home appliances, and, at a very affordable price. In this article, we'll look at how to connect a digital receiver to a TV.
Digital receiver connection
A digital receiver is a device,which receives a digital signal and transmits it to another device for outputting the digital image. Digital TV far exceeds the level of quality of the usual and is now widespread throughout the world. To connect a digital receiver, you need to perform a simple sequence of actions:
- Red, yellow and white wires are connected to the corresponding inputs, that is, they are inserted into the connectors of the same colors. If necessary, you will need to use a special adapter.
- When connecting the receiver, it is necessary to remove the protective film from it, as it can become hot during operation.
- Then go to AV mode on the TV by pressing the corresponding button on the remote.
- After that, you just need to turn on the receiver and wait for the indicators to light up. (If the receiver is not installed, learn about its connection from the How to connect the receiver).
- If you connect a TV receiver with an antenna, you should connect the antenna to the corresponding socket of the digital receiver.
This completes the connection. Now you can enjoy digital TV. And, all this procedure takes quite a bit of time - about 20 minutes.
Perhaps you need an article How to choose a receiver.
In addition, we recommend that you visit the Setup and Connection section. In it you will find a lot of useful information on how to configure and connect a variety of devices.
