How to connect a Telecard?
Satellite TV is getting biggermore popular, because it is not only the ability to choose from hundreds of channels your favorite program, but also a good reception quality and a pretty pleasant price. In this article, we will talk about how to connect and configure satellite TV from the "Telecard" provider.
Coverage Area
Before setting up a television, you need to make sure that you are in the zone of quality reception. To clarify this question, please click here.
Installation of the dish and connection to the TV
The main requirement for antenna mounting is placementit's on a stationary surface, that is, you have to either install it on the roof, or on the wall, and therefore without a puncher can not do. First, you need to fix the bracket, then collect the plate and, ultimately, connect the cable to the receiver. Then you need to connect the receiver and the TV.
Customize
Turn on the TV and the receiver. TV switch to display the signal from an external source "AV". After a while there will be a picture with the inscription "No Signal", this picture is good news, informing that the plate is working, but it is not configured for the satellite.
Press the "Menu" button on the remote and select the option"Setting the antenna." We look at the indicators "Power" and "Quality", our task is to achieve the adjustment values - 90% and 70% respectively. Unfortunately, it is impossible to program these settings programmatically, which means it's time to ask for help - it's most convenient to set up the antenna when one person monitors the quality, and the second turns the antenna in different directions, trying to find the best possible signal from the satellite.
Important! When the optimum value is found, firmly lock the dish in this position!
As you can see, there is nothing complicated in connecting and setting up the cymbals, but if you do not have enough information, we recommend downloading more than detailed instructions from the "Telecard" provider.
Perhaps you will also be interested in the section - Setup and connection.
