How to connect a car subwoofer?
Watch the video
In order to listen to better musicyou can connect a subwoofer to the car. Especially, factory sabas in cars are very rare. Therefore, information on its connection, which can be found in our article - How to connect a sub.
Let's read more about how to connect a car subwoofer.
Instruments
To connect the subwoofer you need the following tools:
- Flat nose pliers or pliers.
- Capacitor.
- Fuse.
- Wiring.
- Insulating tape.
- Screed.
- A set of keys.
Step 1. Selecting the speaker
So, how to connect a car subwooferyourself? First of all, you need to select a speaker for this. Ideal - a 10-inch sub. It gives an opportunity to receive additional and frontal basses.
Step 2. Preparation of the box
We'll figure out how to connect a subwoofer in the car. This will also require a box. For the chosen dynamics, its volume on the average is about 45-50 liters. In the box, we must provide connectors for the speaker itself, bass reflex, handles, sockets. The product for beauty can be covered with a cloth. Nuance: if the subwoofer is passive, you need to connect an amplifier to the car stereo, which will feed low frequencies to the speaker.
Step 3: How to connect
How to connect the sub in the machine correctly? To do this, you need to know the connection order.
- First, the wiring is laid in the engine compartment, stretches to the trunk.
- In the trunk of the wires are output through a so-called technological hole. The wires "+" and "-" are connected to the amplifier.
- The amplifier is connected to the radio with RCA cables, or so-called tulips.
- "Tulips" must be connected in accordance with the color connectors.
- The wires are pulled back together with the power cable, which is connected to the amplifier. Also, the power cable is connected.
- The last step is to connect the amplifier to the subwoofer.
Also important information on how to choose a subwoofer, in our article - How to choose a subwoofer.