How does a washing vacuum cleaner wash?
Vacuum cleaners belong to a separate categorytechnology, which allows not only to carry out wet cleaning of premises, but also to wash windows, to clean upholstered furniture. They are simply irreplaceable wherever pets live, children, especially in multi-room flats, cottages, etc.
As you know, the basis of the work of any technique liecertain principles. Also, this or that technique may have its own peculiarities of operation. Therefore, it is necessary for yourself to find out how to clean the washing vacuum cleaner, how to properly clean it with an apartment, for which surfaces of the room it is best to use it, so as not to cause unnecessary problems. It is also important to know which surfaces are generally forbidden to be cleaned with a vacuum cleaner.
Principle of operation
Usually, all washing vacuum cleaners have two tanks, inone of which is filled with water immediately before cleaning. During operation, water from the tank through the hose comes under pressure into the nozzle and is evenly distributed over the desired area of the surface, which should be cleaned. Then, the same, but dirty water returns back to the vacuum cleaner, getting into the second container through special channels. This is the principle of the washing vacuum cleaner.
It should also be noted that this technique in most cases cleans the air with a specially designed filter, sometimes not even one.
Features of operation
Some surface areas do not like moisture,so they should not be cleaned with a vacuum cleaner. This is parquet, laminate (without special coating), carpet. This is explained by the fact that water can get into the space between the boards and the joint of the parts of the coating. Gradually the material will soften and deteriorate. Therefore, before figuring out how the washing vacuum cleaner works, you should pay attention to the nature of the surfaces on which it will be used.
It should also be added the following: it is possible to clean the vacuum cleaner with a vacuum cleaner, tile, latex carpets, stone floors, textiles.
Cleaning of the room
Before starting cleaning, it is necessary to collectvacuum cleaner according to the manufacturer's instructions. Next, pour water into one of the reservoirs of the vacuum cleaner. You can pour water with the recommended detergent. Then, if it is a carpet, it is first necessary to vacuum it without using water to remove most of the dirt. And then there will already be a turn for such an important action as the work of a washing vacuum cleaner. With its help, a wet cleaning of the carpet or other surface is carried out. After cleaning, you need to dry everything that was vacuumed.
If it is necessary to clean the upholstered furniture, you should put the appropriate nozzle and select the minimum water supply mode.
