How to start a car without a key?

Many certainly for once, but lost the keys tofavorite car. And most likely the second set of keys was not at hand, besides, that it was necessary not only to get into the car, but also to get it. For those car enthusiasts who want to know how to start a car without a key, there are fairly simple tips from experienced masters. More precisely, simple advice is one, but several actions are necessary. Let's describe them.

The first way

First of all, you need to determine the screws,The locking panel that covers the steering column. Then use a screwdriver to unscrew all the screws and remove the panel, lifting it up. Now you should see the ignition key. Here it is necessary to remove the fasteners connecting the steering column and the ignition key, which will lead to the unlocking of the steering wheel. Then unscrew the screws that hold the electrical part together with the wiring with the mechanical part of the ignition key. Now it remains only to insert a screwdriver into the hole for the key and turn it in the same direction as if you were turning the key itself. That's all, the car should now start. If you have any difficulties (although it should not), you can try another method.

The second way

So, you got to the ignition lock (seeprevious chapter). Now before you is a bundle of wires that are brought to the ignition. Very good, if you have a special device - a multi-tester, but this is an ideal option. If there is no multi-tester, then a simple light bulb from a flashlight is also suitable. We should distinguish 3 groups of contacts: wires that supply power from the battery, then wires that provide power to the car when connecting to the battery cables, and finally wires that supply power to the starter when connecting to the battery cables. In most cases it turns out that there are only one wire in the 1st and 3rd groups. In order to start the engine, you need to first connect the wires of the first group to the second group, and they must be connected securely, because if they suddenly disconnect during the movement, the engine immediately stalls. After that, we close the third group with the first and the second ones already connected, and we close the same way exactly as we used to do with the key. After that, we hide the wires, wrapping them with electrical tape, because when the engine is running you do not even need to try to rotate the starter, as this will be the best way to break it. Check it is not difficult, but it's not desirable - just close the starter with the connection of the 1st and 2nd groups, and you'll hear how it starts to tear. To muffle the engine, you just need to disconnect the first and second groups of wires. So, we found out how to start a car with a multi-tester or a conventional flashlight and learned how to start the car with a screwdriver. Now about how to start a car with a pusher.

Starting a car with a pusher

This helps in cases where the machinethe battery is exhausted. This will also require the help of another, and preferably two people. Get behind the wheel and set the neutral gear. Now turn the ignition key and gradually accelerate. Next, squeeze the clutch and engage the second gear without releasing the clutch. Now, wait for the car to pick up a small speed and release the clutch pedal as smoothly as possible, while just pressing the accelerator pedal. There must be a slight push, and after that the engine itself will start. Now press the clutch again, and then press the brake to stop the machine. But how to start a car with a pusher yourself? Turn on the neutral and turn the ignition key. Then get out of the car and, opening the driver's door, start pushing the car, while driving. Only this requires a slight slope of the road. When the speed of the car reaches about 10 - 12 km / h, jump into the chair and, squeezing the clutch, engage the second gear. Then, just pushing the foot on the gas pedal, remove the leg from the clutch. With this method, be careful not to knock down pedestrians or not to meet other cars passing by.