How to connect the cable to the TV?

The TV is in every house and not surprisingly,that people want to watch it in good quality in any room of the house. In order to make this possible, in addition to the TV you will need to purchase another special cable. You can connect it yourself - there is nothing super complicated in this. You just need to follow the instructions clearly and you will succeed. This article discusses how to connect a cable to a TV.

What is needed for this

1. Cable (the length you choose yourself, based on your needs)
2. Tools for fasteners
3. Plinth made of plastic (if you want to hide the cable)

Connecting the cable to the TV

Consider the process of how to connect a cable toTV. First, you need to choose how to connect the cable, determine the number of required connectors and the way by which you will hide an extra cable.

When this stage is completed, proceed to the following: we take the cable with the connector that is attached to it, and conduct the connection and signal quality diagnostics. After that, we pull the cable to where the TV will stand. The cable is fixed with the help of special fasteners (by the way, it is better to select them in the tone of the main color of the room so that they do not stand out against the general background). It is best if the cable is hidden as much as possible (behind furniture, under carpets, etc.). However, in no case can not put on it any heavy objects or allow constant moisture on it.

If you selected the method of private connection,then the skirting board is attached along the wall, and the cable is attached to its inner part by means of a special stapler and is closed by the second part of the plinth. If you want, you can choose a plinth in the tone of the walls or semi - good, a wide color spectrum allows you to do this. Due to the durability of this skirting board, you will not have to think about it for a long time. Another advantage of the plinth is that it makes it possible to hide the excess length of the cable.

If you are still undecided, in which room the TV will stand, then it makes sense to think about how you can later transfer the cable to another room.

Connecting the Notebook to the TV

In order to watch movies or anytransmission on a screen larger than in a laptop, it is connected to the TV. In principle, there is nothing particularly complicated in this process, but there are a number of subtleties that not everyone knows about, but which are important enough for a quality connection.

Consider how to connect your laptop to your TV. The cable must be selected correctly. To do this, you need to inspect all available connectors, it's better to use the TV's passport, or to inspect its back panel and find out about the resolution that the TV supports. After examining the TV, go to the laptop and study the connectors that are available on it. In order not to confuse anything, you can write down all the data. If both the TV and laptop have the same connectors, then there is no problem, but if all the connectors are different, then you need to choose the most suitable combination of connectors and buy an adapter or a special cable with different connectors. Based on the information received, go to the store and select the appropriate cable.

Now, as for the cable itself. First, experts do not recommend buying too expensive options - it will be enough to have a cable with an average cost. Secondly, the smaller the cable length, the better the image quality, so if it is possible to place the laptop next to the TV, it is better to use it. The most optimal cable length is from 3 to 5 m.

After the cable is selected and purchased,proceed directly to connect and configure. Connecting the cable is quite simple: you need to take the cable and plug it into the appropriate connectors on the laptop and on the TV. Next, you need to make a setting. First turn on the TV, then - the laptop. Depending on the cable, an image from the desktop of the laptop may appear on the TV screen, or it may be just a black screen.

A program for setting up two or more monitors,as a rule, is bundled with the drivers to the video card. If you did not want to install it when installing these drivers, then you can download new drivers and install this program together with them.

Next, we begin connecting the laptop to the TV. To do this, right-click on the desktop, select the "Properties" section, go to the "Options" tab, where we click the "Advanced" icon and select "Desktop management". From here you need to go to the settings tab of the installed video card and find the "Display" item, then "Split Screens" and then "Multiple Monitors". After that, you can configure the laptop and TV, selecting the desired items from the proposed options. For this it will be necessary, first of all, to set the resolution of the TV and set the viewing modes. Most often choose a mode in which both screens show the same image.

That's it, the connection and setup are complete. Now you know how to connect the cable to the TV. You can do it yourself and enjoy viewing. Good luck to you!