Pen Spinning is a fairly new hobby inModern society, which, thanks to its simplicity and accessibility, is gaining more and more admirers. In order to do PenSpinning'om and perform a variety of tricks, you need to get a special pen that you can build yourself. However, most people familiar with this area do not know how to make a pen for penspinning superficially, and it's very simple. A step-by-step instruction, described below, will help you in its manufacture.

Make pen for pispinning

In order to make a handle for penspinning,you need two identical gel pens. They should be removed from the caps and cut off the rear ends in such a way that the length of each handle does not exceed 9 cm. After this, you need to file a file or file to saw off uneven edges and sand it with sandpaper.

Then you need to find the connecting element thatwill fasten two handles into one. For these purposes, you can use a durable pencil, you just need to cut a short piece about 3 cm from it, or a metal bolt 3 cm long, only you need to saw and grind its bonnet.

It should be noted that the thickness of the connecting elementshould be such that it tightly enters the openings of the sawed end of the handle. Some people, not knowing how to make a handle for penspinning, suffer with this part, because they can not find the right bolt or pencil. But if you managed to find a suitable option, you should insert a bolt or pencil into the hole on one side to the middle, while on the other hand you will need to put on the second handle. As a result, sawed edges should meet in the center.

After this, it is necessary to take a narrow isolationtape and tightly, overlap the center of the resulting handle, so as to completely cut off the connector. That's all pen for pispinning is ready and it can be used. But after finishing it, you can write to it. To do this, you need to find two identical gel bars, cut them off with a clerical knife, insert them and twist the metal tips. Now you know how to make a penpinning pen, and you can surprise your friends with tricks.

Comments 0