How to refill the pen?

Despite the fact that the pen fountain penlong come ball and gel, many people prefer ink. And the ink pen of the world famous company Parker is not only a stationery, but also an attribute of prestige. To enjoy using it, you need to know how to fill the pen with ink and how to properly hold the pen with the pen.

How to Fix a Pen Pen

In clerical shops are usually representedSeveral types of ink, which differ in shades, consistency and quality. To fill ink pens will suit ink with the inscription "fountain pens", that is "for pen pens". The way the pen is filled with ink depends on the filling mechanism.

Piston filling

1. Disassemble the body of the handle.
2. Inside the case there is an ink plunger with a clamp on the end, which must be scrolled counter-clockwise.
3. After loading the pen into the ink, scroll the clamp all the way to the opposite side.
4. To remove air from the container, the clamp should be slightly turned away until the first drop appears.
5. Wipe the feather with a tissue napkin and collect the pen.

Converter

1. Release access to the converter.
2. Put the pen in the ink, turn the converter head to the right.
3. Remove air from the container, clean the pen and tighten the housing.

Replacement cartridge

1. Remove the upper part of the housing.
2. Replace the used cartridge with a new one.
3. Open the safety valve, release the air before the ink appears.
4. Wipe the feather dry and tighten the body.

How to refill the handle of Parker

Handle Parker is not only writtentool, but also a stylish accessory of a business person. To prolong the life of this expensive thing, it needs to be filled only with branded ink, as Parker ink capsules contain cleaning solvents. In addition, Parker ink meets a number of other requirements:

• retain a rich color for a long time;
• instantly absorbed in writing material;
• have a high wetting power, without spreading through the paper;
• correspond to the density of the handle design.

Handles Parker have an ink filling systemcapsules. To replace the capsule, remove the cap and unscrew the sleeve located on top of the housing. After removing the empty capsule, a new wide side is inserted into its place. To pierce the capsule, it should be slightly pushed and screwed onto the sleeve.

The QUINK Parker capsules are equipped with a reserve capacity. To release an additional portion of ink, just click on the end of the capsule.