How to saw nails?

Nail care means regularsawing of the nail plate. Then it will have the right form, it will not break up and often break down. But how to nail properly? The advice of professionals will help you in this matter.

Fundamental rules

First of all, it is worth familiarizing yourself with the basic rules of how to nail your nails. Experts in this area recommend the following:

Only dry nails can be sawn. They can not be processed after a shower or a bath, because water procedures help soften the plate and it is easy to damage;
Do not cut nails on which there is varnish. It must first be completely removed with a special tool;
Need to cut the nails, starting with the little finger, moving in the direction of the thumb;
If you need to remove a significant length of the nail, thendo this with scissors, and then give the nail the desired shape. If you work in this case only with a nail file, then you can seriously damage the nail plate;
Use a saw always along the nail. If you perform the sawing across the plate, the result of this will be its delamination and brittleness;
To start to saw the nail follows from the edges, not hurrying moving to the center;
Hold the nail file in such a way that the thumb is at the bottom, and the rest are on top;
To process a nail file it is possible only in onedirection, you can not move it from side to side, otherwise it will lead to lamination of the plate. In this case, the movements should be blurred, and smooth, without pressure and pressure;
Position the nail file at a slight angle so that you can gently trim the outside of the nail plate;
Even if you grow your nails, you need to cut them a little at least once a week.

How to cut square nails

If your nails are square, thenfirst they need to be filed in a horizontal direction, and then in a vertical, slightly narrowing the edge of the plate, so that it does not look like a "shovel". After completing the correction, the corners of the square are slightly rounded.

How to cut oval nails

To nail the nails of an oval shape, you first need toedges, while sending the nail file is necessary to the tip of the plate. After that the oval line is leveled, while the nail during this procedure keeps the edge to itself.

How to cut sharp nails

If you want to give your nails a sharp shape, then adjust them on the sides: cut the plate in a straight line, and then perform its polishing.

What nail file to use

As to which nail file to use foradjustments of nails, it is better to take a glass, crystal or ceramic tool. It gently acts on the nail plate, preventing its stratification and brittleness. It is not recommended to use metal nail files or products with emery coating, since they negatively affect the condition of the nails. To polish the plate, use rubber and suede nail files.

You may also be interested in the following articles: