How to insert a button on the laptop?

Many have a laptop at home. Sometimes it is necessary to clean it. About how to insert a button on the laptop, our article will tell.

There are several options for different types of laptop keys. For the process itself, it is enough to have a regular clip.

It is necessary to unbend the clip in a straight line andPass it under the bottom of the key, gently pulling yourself. In most cases, the key easily descends from its base. To remove several keys, you need to use a paper clip several times. In order not to forget from what fastenings you removed the keys, you need to write it down.
To set a key in its place, you need to bevery cautious. It is necessary to set the laptop key in the correct position on its base just above the fixing it needs. When it gets into place, you need to smoothly press the key to its base (platform). Force in this process is not needed. The very press should be easy and fast, so as not to damage the device. The key should be fixed with special elevators (plastic fasteners). Now the keyboard is again functional.
First, it is necessary to engage the bodyThe first part of the plastic fastener (elevator) and click it by clicking on it, then the 2nd part. Now you need to install the button on the elevator. This is a very simple procedure. But it is necessary to remember the following:
- put the button exactly to the place where it should be (not lower and no higher than this position)
- start snapping the button from bottom to top: first click the button at the bottom of the elevator, then at the top

Installation of buttons with a stiffener, for example, the button "space", "shift" and some others should occur in 3 stages: