How do I clean the printer?

The printer in our time is no longer just a whim, but an urgent necessity. It is often used not only in working with documentation, but also for printing beautiful home or studio photos.

Over time, the world market has appeareda lot of printers working on different systems. Some of them are more suitable for office, others for home use. At the same time, a new question arose as to how to clean the printer, because the more often you use it, the faster its operational capabilities deteriorate.

The first thing that any printer suffers from is dust. If it gets into the head or cartridge of the printer, you can prepare for not the best results. Especially for inkjet printers.

How to clean a canon printer or any other from dust

Before cleaning the printer, first cut off the printer, and then remove the cover.
Next, wipe off the dirt and dust roller for paper. Importantly, try not to damage the mechanism. Gently clean the transport roller assembly and guides. This is done to prevent spots from appearing on the paper.
Then, remove the cartridge from the printer, andalso wipe it. Be careful not to allow the cartridge to stay in the light for a long time. When cleaning it, in no case should you use aerosols, or any other cleaning agents.
Wipe the dustproof glass of the block with a soft swab, also without using liquid. This item should not be missed, since it is one of the most important in the matter of how to clean a laser printer.
After cleaning, close all covers of the printer and check its print quality.

Most often for home usejet printer. First, it is cheaper, and secondly, it can boast of a good print quality. Therefore, if you are a lucky owner of such equipment, but do not know how to clean an epson printer, then you should remember a few simple rules.

How to clean the printer head

Initially, it is necessary to soak the dried paint. This process takes about four hours.
If you have a printer with heads built into the cartridge itself, then you just have to remove them and put them on a container of water. Attention: the head should not be submerged in water by more than 2 mm.
To accelerate the cleaning of the heads of Hp printers, you should add a little ammonia to the water.
Afterwards, you should refill the cartridges, andstart the standard cleaning process. With minor contamination, you can use special sprays factory-made. But, it is worth noting that they are effective only at the initial stages of contamination. If you do not know how to clean the printer nozzles, you should fix it. First make sure the machine is turned off, and then press the "Maintenance" button until "H" appears. Then press the "Color" or "Black" button. If the print quality has not improved after that, then you should do a deeper cleaning.
In case of deep cleaning, all ink should be pumped out of the cartridges and replaced with a special distilled solution. And then immerse the print head surface in warm water.
Select a picture and type it several times in succession - this is done to run the printer. In this way, you will help clean up the print nozzles.
Next, set all printer settings to maximum and print a couple of pictures again.
Remove the remnants of water, and on this question, how to clean the inkjet printer, can be completed.

How to clean the printer cartridge

Cartridges are not easy to find now. But, if you do not clean them, on your printouts you can very quickly find white spaces.

Many inkjet printers (and not only) are equipped witha special program that automatically clears the cartridge. With such models it is easy to work, builds only to go into the control panel and open the printer settings. There you will find a special section "Tools and cleaning cartridges."
Or, you can clean the cartridges yourself. To do this, you should first get them. Remember: remove cartridges from the printer only for half an hour, and no more.
Clean them one by one, and then use only a specially prepared soft fabric with no prominent fibers. Also, prepare filtered water and rubber tampons for cleaning.
After you get the cartridge, check itfor spots and cracks. In general, it's worth doing regularly, especially it's worth remembering by that user who does not know how to clean the hp printer.
Remember, once you have cleaned the cartridge it should be left to dry. And put it in such a way that the nozzle "looked up".