How to install a plinth?
Watch the video
At its core, the installation of the baseboard isthe final stage of construction work, as it completes the finishing work in any room, so the question of how to install a plinth is of interest to many. Without a skirting does not do any room, because it is the baseboard that aligns the wallpaper line and creates a complete view of the room. The main function of any plinth is aesthetic. For today, in any construction shop, you can offer a plinth of any material - wood, plastic and so on. The most expensive and beautiful are skirting boards made of wood, since they are made of natural material. Installation skirting from any material is not very different, so the installation rules are initially general, as for preliminary work.
Choice of fixing the plinth
Before installing the skirting, you must selectthe method of attachment to be used. Many choose such an option as liquid nails, however, it should be taken into account that this option is suitable only in those rooms where the walls are ideal. In another case, nails can not be considered as a reliable attachment option. In this case, if you are interested in the question of how to install a plastic skirting board, it is better to use such a method as fixing the skirting boards. The advantage is that the bar is fixed under the baseboard, and the installation will be easy and fast. The big plus of this method is also that during the next repair, it is easy to remove it and then attach it back.
Skirting installation process
If you are wondering how rightto install a plinth, it is important to initially have the necessary tools, namely a tape measure, a hacksaw, a hammer, a marker, a drill, a screwdriver with various nozzles, drills. The first step that must be performed is markup. It is better to begin marking with a corner or a door, for this purpose the workpiece is put to the right place and the necessary length is measured. One of the important moments is cutting the skirting board with a miter saw. This tool makes it possible to cut at the right angle, in addition, joints are obtained in this case more dense. If there is no such saw, then a hacksaw on wood will do. In all corners the plinth must be sawed at an angle of 45 degrees. It is necessary to ensure that the joints fit as tightly as possible, most precisely, if the strips are slightly overlapped and then cut off.
The next step is drilling holes in thewall at a distance of about 50 cm from each other. For this purpose, an electric drill and a carbide or diamond drill are used. The depth of the hole itself will depend on which mount is used. These dowels are placed with dowels, then a screw is fixed with a screw, into which the plinth itself is inserted smoothly. Skirting should be started on one side and then gradually, pressing down, set along the entire length. If you doubt how to install a plinth, a video on the Internet will help you. If you need to install a ceiling skirting, then be sure to use our other article - "How to glue the ceiling skirting board?"
