How do I install the blinds?
Watch the video
If you do not know how to install the blinds, then thisarticle for you. Once you have installed plastic windows in your apartment, the problem immediately arises because the curtains need to be selected for new, modern curtains. And there is nothing better than to install blinds on windows.
For this, it is not necessary to refer tospecialist, because you can do it yourself. So, first you should know that there are different blinds that differ in design and location, as well as in the manner of attachment. By design, the blinds are horizontal or vertical, as well as roll. Blinds can be fixed to walls or ceiling. Also there is an option of fastening on the window frame. If we talk about the ways of fastening, then the blinds are fixed to the clamps or screws, as well as to the self-adhesive tape.
Types of blinds
When choosing the type of blinds, you need to pay attention toThe room where they will be installed, also should measure the width of the window sill, since in order to fasten the blinds to the wall or ceiling, the opening frame should not end beyond the edge of the windowsill. That's why vertical blinds with this fastening are ideal for installation in the office.
For installation in the house is best suitedhorizontal blinds on the glass. They are able not only to change the illumination in the room, but also reflect the rays of the sun, while reducing the operating time of the air conditioner by about a couple of hours. In addition, they perfectly decorate the window with decorative curtains, which is required for the design of the room.
Using roller blinds, you can make an idealdarkening the windows, using them to make a dense fabric. This option, changing the appearance of the room depending on the pattern, is ideal for a bedroom.
To install blinds on plastic windows, more oftenall for vertical blinds use a fixing on the wall or ceiling, when the window opening is completely closed. In the event that the geometry of the window openings is broken, this is the most correct decision. Thus, you can cover up these flaws. If only the glass is closed, then use the mount on the frame. This option is used if horizontal blinds or rolls are installed. Due to this fastening, it is possible to achieve alternate or simultaneous closing of the frames of one window.
Installation of blinds
Before installing plastic blinds withmounting on a wall or a ceiling, be sure to mark the places where the brackets are fastened. Then, on this layout, drill holes in the wall for the dowels and fix the brackets on them, and then install the blinds.
If you fasten the brackets on the opening frameblinds with the help of special clips, then you do not need to drill the frame. In the same way, you can install the blinds when attaching them to the frame using a self-adhesive tape. Of course, to install the blinds directly on the frame is best for the specialist, you should be very careful and careful not to damage the double-glazed windows.
To learn how to properly install the blinds,if the article for you is not entirely clear, it is recommended to see how to install the blinds on the video. Here you will clearly see what to do in what order. If you are careful, careful and careful, it is quite possible to perform such an installation yourself, without the help of specialists.
