How to assemble a lamp?

Watch the video

The original lamp, which will be very brightBurn, you can collect from unnecessary CDs. How to assemble such a luminaire, and that in addition to the discs will be required for its manufacture? Everything is not as difficult as it seems at first glance. Here is a step-by-step description that will help you make the original lamp from improvised materials.

Materials and Tools

disks (12 pieces);
soft wire (instead of it you can use ordinary paper clips);
protractor;
Powersave lamp;
cartridge for energy-saving lamp with a connected cord;
nippers;
screwdriver;
Drill for a screwdriver in 2-3 millimeters in diameter;
marker;
a reel for storing disks;
pliers;
ruler.

The order of performance of work

First, you need to take a disk and partition it into 5 sectors of the same size;
Then, in the middle of each sector, at a distance of 0.5 centimeter from the edge, drill through the hole, having previously marked them so that they are even;
Now you need to put all the disks in a reel, put a disk with holes on top;
Further through the holes of the upper disk, you need to drill the remaining disks so that all the holes are the same;
After all the holes are ready, a cartridge must be placed in the central part of the upper disk. From the wire (clips) you need to make 30 staples in the shape of the letter "n";
With the help of these staples you need to fasten 5 disks - there will be something like a camomile opened;
The same must be done with the remaining disks;
The bulb must be screwed into the socket. You can learn how to change burned bulbs from our article How to change light bulbs;
Now you need to connect chamomiles from each other with each other;
Think of some kind of fixture to suspend this fixture. All is ready.

Information on the order of assembling the chandelier can be found in our article - How to assemble a chandelier.