How do I remove the back cover of the tablet?

Most modern tablets look likemonolithic and misleading that they can not be disassembled or exposed to a simple user. However, this is not the case. If you look closely, then on each device you will find the lines of joints and will be able to cope with its opening independently. To make things easier for you, we offer instructions on how to remove the back cover of the tablet.

Before you start, think carefully, it's worthDo it. Remove the cover - it's not tricky, but here's to do it neatly, without damaging any parts, and leaving the equipment in working order is much more difficult. In addition, the most common reason for opening the rear panel is to replace the battery. We hasten to upset you that in most models it is soldered to the motherboard. Therefore, if you do not have a discharge for accurate soldering, then it is better to leave this matter to professionals.

For work you will need the following inventory:

screwdrivers of various shapes and sizes;
a regular plastic card or a pick for a guitar.

Instructions for removing the cover

To begin with, carefully inspect the cover for the presence of various locks or screws (can be under rubber plugs).
If any are found, carefully unscrew them or open them. All the seized screws should be placed in separate containers, making a short entry for yourself about where they were.
Extremely gently pry the tablet cover with a mediator or plastic card. Push them to the depth of about 5 mm, then smoothly along the entire perimeter.
After that, gently lift the lid, making sure that no trails or elements are attached to it.

Try to often not open your tablet. After 2-3 openings, a part of the latches and retainers can not withstand and break, which will lead to the formation of a gap into which dust and other contaminants will regularly fall.

In addition to the instructions, see the information in the How to open the tablet cover.