How to remove the gear lever?

Most often, the main reasons whyit is required to replace the car gear selector, there are various mechanical damages that can not be eliminated. With the passage of time, the quality of the work of the element falls. If the base of the part is in good condition, then it will be enough only to change the bushings or the support from the plastic. Consider how to remove the gearshift lever to replace it.

Stages of dismantling

To perform the dismantling it is necessary.

1. Remove the leather cover from the lever.
2. Disconnect the fastenings of the decorative plastic tunnel and remove it from the car interior.
3. After performing these actions, you can proceed to the dismounting of the lever. First, unscrew the fastening nut and remove the bolt from the shaft.
4. Then you need to unscrew all the bolts that secure the lever to the body.
5. Carefully turn the lever and take it out by removing the cover from the base.

The process of installing a new lever is made inreverse order. If only one of the elements fails, disassemble the lever. First, its axis is extracted. You can unplug this part after removing the plastic sleeves. Opening the lever, you can begin to replace the elements that are out of order. Before assembly, the element must be greased with a consistent composition. If necessary, you can replace the worn leather case with a new one.

Now you know how to replace the shift lever, and you can do it yourself without contacting the car service. Perhaps you will also be useful article How to assemble the gearbox.