Why does the wrist watch stop?
We need wrist watches in order toaccuracy determine the length of time we are in, and plan our further actions and daily routine. Usually we rely entirely on the information that this mechanism gives us. But sometimes his faultless work is interrupted by any malfunction. In this article we will discuss why the wristwatch often stops.
Causes of stopping the clock
The clock can stop for various reasons, and they depend first of all on what type of watch the mechanism has. Consider three categories: mechanical, quartz and electronic watches.
Why stop the mechanical watch
The mechanical clock can stop for the following reasons:
- Forgot to start a clockwork mechanism. "Repair" the problem is simple - just twist the wheel a little.
- Dust or moisture has entered the enclosure. It is necessary to carefully remove the lid, wipe the mechanism, if there are traces of moisture - to allow the clock to dry thoroughly.
- Dry lubrication mechanism. A few drops of lubricating oil will return your watch to life.
- The clock was close to the magnet. Most likely, they no longer help and they stopped forever.
If there is any doubt as to the cause of the malfunction of the watch, it is better to take it to the master for professional repair.
Why stop the electronic clock
If your watch with the electronic mechanism suddenly stopped working, then pay attention to the following factors:
- The battery inside the case may be damaged. Repair the defect by simply installing a new battery.
- Inside the mechanism, moisture has fallen (provided, of course, that your watch is not moisture-resistant). In this case, it is necessary to open the housing and dry the device, if the fault persists, then carry it to the workshop.
- The device was subjected to a strong shock (more protected by shockproof models). Depending on the degree of damage, the watch will need to be repaired, and in some cases also replaced.
Why stop the quartz watch
The reasons for stopping all the watches are very similar, no quartz exceptions were made. They can stop because:
- Defective batteries. Installing a new battery solves the problem fairly quickly.
- Another reason is the failure of the chip. The replacement of the damaged part is required, which is done in the clock workshop.
- Not less than other quartz watches do not like moisture and mechanical impact. In this situation they will also need the help of a qualified watchmaker.
Also it is worth remembering that leaving the watch with anythe mechanism around household appliances, such as a refrigerator, microwave oven, TV, etc., is unsafe. The magnetic field emitted by these devices can disable any clock and deprive them of their ability to work irrevocably. More information about the causes of malfunction of the watch movement you will get from the article Why the clock stops.
