Why does Tricolor write "no signal"?

Tricolor is a digital television provider that provides uninterrupted television broadcasting.

But sometimes there is a situation where there is no connection signal, and many are beginning to look for information about why Tricolor writes "no signal".

Possible problems

The reasons why Tricolor TV may not work may be different. Conditionally they can be divided into several groups.

Problems with satellite dish

The inscription "no signal" can appear for the following reasons:

incorrectly installed antenna;
settings of the antenna are knocked down. Due to bad weather, some settings can be knocked down, so you need to turn the antenna a little bit so that a signal appears.
change of frequencies of broadcasting. If some channels do not show, then you must manually configure them.
problems with the convector. If the convector fails, it must be replaced.
cable breakage. Also, the cause of broken channels can be a cable break from the receiver to the TV.

Problems with setup and connection

Also, the absence of a signal can be a consequence ofwrong connection of the satellite receiver. To do this, you must check whether the cable is connected to the output. After that, on the TV you should select the required connection (RCA (bells), Scart or HDMI).

In addition to the connection and inoperability of television, Tricolor can be found in the articles: