How to connect Alpine?

Watch the video

Note that the musical accompaniment in the car -this is a necessary part of a pleasant trip. To organize such an accompaniment, you need to properly install the radio. Our article will tell you how to connect the recorder from Alpine.

Recorder from Alpine: install correctly

The step-by-step instruction includes the following steps:

First of all, it is necessary to take care of the safety of the electrical systems of the car. To do this, open the hood and disconnect the positive terminal of the battery;
After that, go to work in the cabincar. Remove the dashboard (see the operating instructions for your machine for detailed instructions). We are only interested in the part where the car control systems are installed and, in fact, the radio tape recorder. As a rule, it is enough to unscrew the two screws and pull the panel towards you;
Disconnect the radio cassette recorder from the panel. Press the four tabs on the sides and pull the device toward you;
Unplug all connectors connected to the old radio;
Connect the antenna to the dedicated single connector on the Alpine radio. In addition, by the principle of similarity, connect the remaining wires in addition to the antenna;
Change the red and yellow wires when connected. This is necessary for the stable operation of the device;
Once all connections have been established, you can proceed to the power connection. Set the positive terminal on the battery to its original position. The device is connected!

Learn more useful information from the section Car accessories on our website.