How to get a scooter?
Watch the video
So, you bought a scooter (moped) or it gotyou as a gift. And if, by coincidence, you do not even know how to start this machine, do not worry: now we will tell you how to get a scooter and what to do if it does not start or you lose the keys.
How to get a scooter in two ways
If you are going to start a scooter for the first time,check whether the tank is filled with gasoline - if not, then it is necessary to refuel. Do not worry if the moped first starts for a long time. Next, make sure whether the scooter leans on the bandwagon. After inserting the ignition key, turn it to the "ON" mark: the dashboard will light up immediately, and the arrow indicating the fuel level will take off from the zero mark. There are two options for how to start the engine. Let's consider them.
- Option one: with kickstarter. In this case, the engine always starts. It is especially useful to use this method after you have not used the scooter for a long time, as well as with a discharged battery. To do this, it is necessary to properly press a few times on the kickstarter kicked off the leg (while the moped does not start). Sometimes it takes a lot of times to kick the kickstarter in order to start the motor, which is normal.
- Option two: using an electric starter. This method can only be used with an active battery. Still it is very convenient if you travel a lot on a scooter or make frequent stops. To do this, press the brake knob and press the starter button while holding the brake. Next, you must hold the button until the engine starts and then release.
How to get a scooter without a key
There are various unpleasant situations when the keyyou can lose. In order not to encounter this problem, it is better to make at least one spare key in advance. But if you still did not take care of the spare key, and you need to go, you can contact a specialist who will help to solve the problem, or try to get a scooter yourself. Now we will tell you how to do it.
So, to get access to the ignition lock,it is necessary to remove the front cover. The contactor is screwed to the lock, you should unscrew the 2 screws and remove it. Then use a flat screwdriver to turn the core to the stop. Sometimes a turn is possible until the penultimate position, this is the safe mode of starting the engine (so that the scooter does not fall off without your desire).
If the ignition switch suddenly turns onit is necessary to remove the chip from it and find the ignition contact pair. Remember, the above recommendations do not guarantee that the scooter will start, since inadvertent handling of the ignition lock can lead to its breakage.
A little bit about running
In fact, to manage the scooter simply, you needonly to know what and where is located. On the left side there is a lever for the rear brake, on the right - for the front brake. On the right side is also the handle of the steering wheel, which also needs to be gasped with rotation. There is also a button for a sound signal and a starter, as well as various switches (lights, turn signals, etc.). That's the whole dashboard.
Well and more in detail about nuances of management of the mopedHow to ride a scooter. From this article you will learn about the main points of management of this technique, as well as about what documents will be needed.
