How to connect the Internet on the iPhone?
Watch the video
Usually when you activate Apple products, configureInternet is automatic. However, there may be a problem and the network will stop working. In this case, you have to configure the access yourself. Today we will look at how to connect the Internet on iPhone.
If your SIM card is corporate, thenmost likely the service that allows the phone to access the Internet will be disabled. In this case, you need to contact your mobile operator and order this service.
How to configure 3G
Check the connection of the mobile Internet service, and then go to your phone settings: click "Settings" and go to "Cellular". Then enable "Cellular Data - Enable 3G / LTE".
Check if the 3G / LTE icon is lit in the left corner of the phone screen. If the letter "E" is lit, it means that there is no 3G / LTE network signal.
If you have problems with connecting 3G / LTE signal, you need to check the data transfer setting
Configuring Data Transfer
To do this, go to your phone's menu and select "Basic Settings", then "Network", and then "Cellular Data Network."
Then you will see three items: "APN", "User name", "Password". It is necessary to check if the settings correspond to your cellular operator.
MTS
- APN: internet.mts.ru
- User Name: mts
- Password: mts
Megaphone
- APN: internet
- Username: (leave empty)
- Password: (leave empty)
Beeline
- APN: internet.beeline.ru
- User Name: beeline
- Password: beeline
TELE2
- APN: internet.tele2.ru
- Username: (leave empty)
- Password: (leave empty)
You can also find out the settings for connecting the Internet by calling your mobile operator.
If you find that the data entered incorrectly when checking the settings, click the "Reset settings" button, restart the phone and enter the data again.
If, in this case, the 3G / LTE signal does not work, you should contact the service provider of your mobile operator.
Read our article How to configure 3G on the iPhone.
How to set up Wi-Fi
You can connect Wi-Fi signal on iPhone in several ways.
If the router (router) distributes IP addresses in automatic mode
In this case, you need to enter the settings of your phone. Click on "Settings" and select "Wi-Fi".
Check if the slider is on, if not, move it to activate the Wi-Fi signal connection.
Next, select the desired network name and enter the password.
If the router (router) distributes IP addresses in automatic mode or requires DNS registration
In this case, you need to click on the button that is to the right of the network and prescribe the network settings.
If it happens that the Wi-Fi is configured, but the network does not connect, then in the network settings, select the option "Forget this network" and again configure the settings.
If problems occur, you need to restart both iPhone and the router itself.
Read our article How to configure Wi-Fi on the iPhone.
Also, when you connect the Internet on iPhone, articles like How to include the Internet on iPhone and How to set up the Internet on the iPhone can come in handy.
See also the iPhone section.