Where is the idle sensor located?

It's nice to sit in a warm car when the carIt costs, and the engine runs smoothly and almost noiselessly. For this, as a rule, the no-load sensor responds. When the harmony of work is broken, and the motor starts to stall without load, that's when you think about where the idle sensor is located, after all, the reason is probably in it!

A regulator or valve is so correctly calledthis sensor, its function is designed to regulate the idling speed of the car (when the car is stationary, the gear is not engaged, there is no load from the gas pedal). To ensure such a uniform operation, air enters the engine, and the idle valve regulates this quantity in the correct volumes.

Where is the idle sensor in the engineeasy to determine. It is located on the throttle knot. You can find this unit through the air duct (a wide branch pipe after the air filter box), which is suitable for it and a number of different heating and ventilation pipes. There is a regulator on the throttle body. It is attached to it with two screws, looks like a small cylinder. Remove the regulator for visual inspection is possible from under the hood. However, it is first necessary to disconnect the connector from the connector with the wires and disconnect several ventilation tubes from the throttle assembly. Then you can get the fixing screws of the sensor.