How to make a tie?

The tie is the subject of a toilet, male, and in recent years, and female, through which the individuality is manifested. The "right" tie gives the appearance of completeness.

A modern tie, worn today, appeared not so long ago: the turn of the nineteenth and twentieth centuries.

Tie since the time of Ancient Rome almost never went out of fashion. Below is described how to make a tie with your own hands, this is the best way to emphasize the unique style and personality

Materials and Tools

1. Iron,
2. Fabric (silk, satin, jacquard fabric),
3. Scissors,
4. Paper,
5. Pencil,
6. Needle,
7. Threads.

How to make a tie: instruction

1. It is necessary to take a thick canvas, cut it into a tie pattern. This canvas is needed to give a tightness to the tie and maintain the shape.
2. Harness the loop. Cut the strip of fabric width, which along the oblique line 4 cm, fold it inward with the front side, pin it with pins.
3. Straighten the stitch along the center of the strip.
4. Unscrew the strip on the front and iron it.
5. Prepare a tie for later processing. Scrape the seam on it. Secure the seam and iron the allowance.
6. To put a canvas base on a tie, straighten itangles. Puncture the pins in the center to secure the part. Sweep and pull out the pins. Draw lines along which the tie will be sewn. Apply similar lines to the canvas base.
7. Otutjuzhit angles, put on the front sidebasis ear made lining. Clearly combine the angles, connecting with pins. Then lay a line starting from the corner and to the edge of the cut. Remove the pins and iron. The second side of the corner is sewn in the same way, after this turn to the front side and again iron.
8. To fix on the basis of the edge of the allowances with the help of pins, to pin the middle with pins with a seam.
9. Sew a loop to maintain the short end inside. For this purpose, at a distance of 30 cm from the bottom of the wide side, mark the place of its location.
10. Sew a loop by hand, grasping only 1 layer of fabric. At the top of the loop make a single stitch bite.
11. Fasten the edges together at the narrow end of the tie. Then the wide edges.

How to make a bow tie with your own hands

• needle (sewing machine);
• fabric (satin, fleece);
• centimeter;
• scissors;
• button;
• elastic;
• thread.

Take the cloth, cut a rectangular piece of cloth. For a standard bow tie, make a rectangle 15 cm long and 11.5 cm wide.

Next, you need to give the tie a shape. To do this, fold the fabric in half on the short side. In the presence of the wrong side - the inside out. Sew three sides. At the same time leave about 2.5 cm from one side not stitched. Turn the future tie outward with the front side through the remaining hole. Then sew this hole with inconspicuous and neat stitches. Find the middle of the resulting rectangle and squeeze the bottom and top so that the bow turns out. Sew it exactly in the center.

Sew a rubber band, then a button and makeunder it a noose. Sew on one end of the gum temporarily. At the other end of the rubber band, make a loop for it. To do this, cut the elastic along so that the button goes into the hole and firmly holds in it. After that, sweep the edges of the hole with stitches. Check the size. If the length of the elastic is comfortable, then you need to sew a button.