How to connect an uninterrupted system?

Watch the video

In order not to spoil your computer, you need to know how toconnect the uninterruptible power supply correctly. Due to this device your PC will be protected from power surges, and also you will have time to save important documents if lights suddenly turn off.

How to charge and connect an uninterruptible power supply

So, to get started, charge an uninterruptible power supply (UPS).

To do this, connect it to the network and leave it charged for 6 hours to 95%. Do not connect the computer at this time, like other external power sources, such as a printer or scanner.
After the set time, connect the computer to the UPS, following further advice.
Connect the uninterruptible power supply to the computer using the special wires that come with the kit. Turn on the computer in the mains filter (tee).
Try turning on the PC without electricity. In this way, you will make sure that the uninterruptible power supply is working.

Also, you will need to get used to properly turning on the PC.

First you need to turn on the uninterruptible power supply. Press the power button and wait for it to turn on.
Then you can turn on the computer. It is very important: you can not turn on the UPS and the computer at the same time.

If required and the power of the uninterruptible power supplyallows, it is possible to connect also the monitor, and the scanner, and the printer. But keep in mind that the more connected devices and UPS, the less it will work without a power source.

You may also be interested in articles from the Computers section.