How to configure Asus RT G32?

Routers or routers are needed for switching(connection) to a computer network with access to the Internet. Thanks to this device, we can freely use the Internet, moreover with a fairly good signal speed. Today we will talk about how to configure the Asus RT G32? Beeline use as a provider? We'll show you how to set up this device for the BeeLine network. As for the router itself, there are opinions here, as always differ. In some, he works without problems and flights of the Internet, while others require "dances with a tambourine." But in general Asus is a fairly high-quality equipment, durable, but there are disadvantages (this is the hardware interface).

Configuring Asus RT G32 for Beeline

Before you configure the Asus RT G32, you needmake sure that all LAN connection properties are set and correctly set on your computer. To do this, go to your Network Management Center, select the connection over the local network and in the properties you must have everything completed, in addition, the IP address must be determined automatically. After that, connect your router, on the back of the device you will find the WAN jack, to it and connect your network cable, connect the special cable that comes with the router to one of the four LAN ports to the socket of your network card.

The next step is to start the Internetbrowser, in its address field, enter your automatic IP address (192.168.1.1). After that you will get a standard, starting page of the router, where the device will ask for a password and login. The standard password and at the same time the login is - admin, enter this value. If for some reason you can not enter the program shell of the router, then carefully look at the documentation for it, maybe you have other passwords. Or, press the "reset" button, hold it down for 5 to 10 seconds, after all the indicators go out, turn on the router and reload the page in the browser. Next, you must enter all the settings for the WAN, because these are the parameters you need to connect to the Beeline. So, you should choose:

WAN connection type.
In the first drop-down list, select either PPTP, orL2TP. The only difference is that at the first case, you should register in the server field (the lowest point): vpn / internet.beeline.ru, and in the second case - tp.internet.beeline.ru.
Keep your IP address automatically, as well as all other DNS server addresses.
In the fields for the name and password, enter your details, which Beeline gave you. Leave all other fields untouched.

Also in this router you can turn on the Wi-Fi access point. Now we will figure out for you how to configure WiFi in Asus RT G32. It is not difficult to do this, but for this you need to take some steps:

In the router menu, select "Wireless Network" and start filling in the required fields.
In the first field, enter any information in your opinion, because this is the name of the Wi-Fi point.
A prerequisite for connecting Wi-Fi on this router is in the "Authentication method" field, put the extension WPA2-Personal.
You must enter a key or password for at least 8 characters. Click Apply and wait when the router establishes a connection.