Why does the lamp flash?

Today more and more people are striving for savings. Not an exception is the use of an energy-saving light bulb, called by the people "a bulb-saving". However, along with the possibility of energy conservation, problems appear: for example, the lamp starts to flash. Why is this happening and how to fix the problem? Let's talk about this in more detail.

Why the lamp flashes: the main reasons

Normally, energy-saving light bulbs do not flicker,so there should not be too much glow. If the lamp suddenly flashes when the light is on or off, this may indicate a malfunction. There are a number of reasons why a breakdown could occur.

Condenser failure

A simple explanation may be the problem withthe operation of the capacitor. The thing is that most devices are connected to a switch, in which there is a backlight. To "maintain life" in the backlight, there is a small amount of current. As a rule, the capacitor is also "recharged", which causes the light bulb to flash.

Current discontinuity in the zero phase

Another reason is the interruption of zero. This means that you have a current break in the zero phase, and this fact is easy to see on the shield. If you are familiar with this case, you will have to draw up an electricity scheme again. The same problem can overtake you in case of faulty wiring, which, of course, will require its replacement.

Problems with the starter

Finally, the cause may be the wrong operation of the starter - the part that is responsible for turning on the lamp. If it fails, it can cause a "dysfunction" in the operation of the entire lighting device.

Product malfunction

The cause of the lamp flashing can also be a malfunction of the product itself. As a rule, a poor-quality product often fails to work, which can cause a flashing light bulb.

How to fix the problem?

So, after finding out the cause of the lamp flashing, you cansafely eliminate the breakdown. If it turned out that the whole fault is the work of the condenser, which constantly "comes alive" from the backlight of the switch, then it makes sense to replace the switch itself. Buy one in which there is no backlight, and this will make it possible to get rid of the light signals sent by the lamp.

The cause of the flashing of the lamp in the off state is related to the wiring? Then you have to replace it. If you find out that she's okay, but the glow continues, you need to check if the contact is good.

In case the problem is related to a break at zero,it is necessary to change the scheme. The gap in the neutral conductor, not the phase conductor, can be dangerous, so it is necessary to reconnect it in the shield. You can check the malfunction with the help of the indicator, and if it does not show the voltage, then the problem of the flashing lamp is in the zero rupture.

If it turns out that the fault is a starter, it will simply have to be replaced. It's inexpensive and very fast.

Finally, if you find out that everything is in order andthe matter is in the malfunction of the lamp itself, it remains to simply throw it away and purchase a new one. Despite the fact that it is too expensive, it makes no sense to use the product, which causes inconvenience.

You can also get acquainted with other articles from our website on a similar topic: