How to connect the TV correctly?

To date, most likely, no one can imagine his life without a television. This is an important attribute that is in every house.

The purchase of a new TV is always accompanied byits delivery to the house and, of course, connection to the network. But the call of the master to the house is paid services. And if the delivery is probably needed, then the connection can be done at home on your own, following the detailed instructions. Let's figure out how to properly connect the TV.

Connecting the TV to the Tricolor

To install Tricolor TV, do the following:

select the place to install the antenna and collect it, following the steps of the instruction that is attached to it;
further adjust the antenna (angle and inclination) and connect all the required cables to the TV (color coding of the cables will help you understand when connecting);
In the settings of your TV, select the satellite from which the signal will be received.
set up the telecast:
- adjust the antenna depending on the displayTV channels. Let's see that the quality was the best. Remember that the signal level can depend not only on the correct tuning of the antenna, but also on the weather conditions. If the streets are clouds or rain, then, of course, the show will be broadcast worse.
- fix the adjusting nuts on the antenna.

Connecting the TV to the computer

Connect the TV to a computer or laptop in two ways:

through VGA;
via HDMI.

Connection via VGA

This type of connector is also known as D-Sub. This is a connection option, as a result of which sound is not transmitted. Also, there are restrictions on the resolution that can output such a connection - no more than 1600х1200. So, we follow the instructions:

We check the presence of VGA connectors on both devices and connect them with a cable. It is better that the computer is turned off when connected.
Press on the remote from the TV button Source or Input and select the type of connection VGA.
Now configure the computer to receive. To do this, in the "Start" menu, start the screen settings, select the "Screen Expansion" option.
When you get a peevish connection on the TV screenwill be reflected all the same as what we see on the computer screen. In the computer screen settings, select from the "Multiple monitors" drop-down list. Below in the option "Multiple Screens" select "Expand these screens". Then we will have two independent screens. You can also choose a different resolution. For more information, see How to connect a TV via VGA.

Connection via HDMI

With this type of connection will not be transmittedonly the video and the image, but also the sound, and this requires only one cable. Also, modern variations can transmit and 3D, but you need the appropriate compatibility.

Similar to connecting to VGA, perform the operations: