How to change the wipers?

Clean and perfect transparency of the windshieldcar - one of the main security conditions. The janitors actively help in the fulfillment of this condition. But constant work always leads to the wear and tear of the part, so you need to know how to change the wipers.

The main reason for the poor performance of the wiper is the wear of the wiper blade, or rather the rubber blade. By design, the wipers are frame, frameless and hybrid.

Replacing the wipers: instruction

Replacing the wiper blade entirely procedurenot complicated. The brush is attached to the holder by means of a plastic plug. It is necessary to open it. Hold the janitor holder with one hand, and remove the brush with the "down" direction. Strongly do not pull, you can hit the glass.

Replace the new item in the reverse order. Hand hold the holder near the "hook" and put on a new brush until it stops. Close the cap and lower the janitor to the glass.

If the design of the wiper allows, it will not hurt to learn how to change the rubber bands on the wipers.

Remove the caretaker from the holder. Use a small screwdriver to remove the plugs from both ends of the brush. A screwdriver is needed to pull the latch inside and not break it. Next, you have to bend the metal "tooth", which fixes the elastic band. Remember, with which groove the rubber band is inserted. Now you can delete it.

Before inserting a new part, moisten the frame anda new rubber band with soapy water. Insert the elastic band into the grooves and stretch it along the frame, you can stretch it with the help of round-nosed pliers. Curl "tooth", if there are excess parts of the elastic, cut. Insert the stubs. Install the brush on the holder.