How do I remove the head restraint?
Any motorist is faced with the fact thatcomes the time of general cleaning of your car. First of all, the seat covers and headrests need cleaning. For better cleaning, it is better to remove them. And here the question arises, and how to remove the head restraint to release the seat cover. At any service station or car wash, this problem is solved easily and simply, but you should understand that this service is paid. You can save money and do everything yourself.
First of all, you need to study the instructioncar operation. The manual should indicate the mechanism for removing the head restraints. You can visit the official website of AvtoVAZ, where you will find detailed instructions in electronic form, how to remove the headrests VAZ 2110. If the standard seats have been replaced, then you should refer to the instructions that are included in the set of seats.
At once it is necessary to determine the type of seats in theyour car. There are front seats in which there are no removable head restraints, but instead the upper part of the chair has an elongated shape, which is the head restraint. But basically the majority of models of cars are equipped with removable headrests. Determined with the type of front seats, it becomes clear how to remove the front headrests. Usually they are mounted on two steel axles. In order to remove them, you must tilt the front seat slightly back. Holding both hands behind the sides of the headrest, lower it down until it stops. After that, pulling the headrest up to him, pulling upwards. He should easily get out of the grooves.
In order to remove the head restraints locatedIn the back seat you need to find a bolt-fastening that holds the back seat. It should be opened and lowered back of the seat. On the back of the back of the chair there is a mount that holds the headrest. If it is, then it must be disclosed. If such fastening is not present, it is necessary to lower the headrest as much as possible, pull it back and take it out. In this case, the latches should click. But most importantly, after cleaning the covers do not forget to install the head restraints in place, adjust and fix them.