How to connect a network cable?

Setting up your own local network requirescorrect connection of computers with each other. For this purpose, use network cables. And for everything to work flawlessly, it's important to know how to connect a network cable.

Connect the network cable

• If you do not need to connect to the Internetcomputers, you should buy a hub. Only when you purchase, look for this device to have enough LAN connectors. After that, connect the network hub to the mains by installing it in the necessary place.
• You also need to purchase the necessarythe number of network cables of a certain length that must be provided with connectors at both ends. If you have twisted pair tweezers, you can purchase a power cord and RJ-45 connectors, and create the necessary number of network cables yourself.
• Once all the necessary componentspurchased, computers should be turned on and connected to a hub. For this purpose, one end of the cable should be plugged into the LAN port located on the network card of the computer, and the second - into a similar hub connector. Make sure that the connector is tightly fixed with a special latch, which is necessary to prevent accidental disconnection of the network cable from the slot.
• Now you need to wait until the operating systemwill detect a new connection to the network. Once this happens you will need to configure this connection. Typically, a similar scheme for building a local network uses fixed IP addresses. They allow you to quickly access the desired computer, and at the same time do not perform its search in the network detection each time. You only need to open the list of active network connections, then right-click the icon for the desired network card and select the "Properties" item.
• After that you need to open the settingsTCP / IP protocol and activate the "Use the following IP address" option. Now you need to enter a numeric value of the permanent IP. A similar setting will also be required on the other computers. After that, the local network will work.

Now you know how to connect a network cable, and you will freely share files.