Useful and interesting tips
the Internet

How to configure the Netgear router?

In this article we will consider in detail howconfigure the Netgear router to work with providers. Your choice of the router was not accidental - Netgear is a budget price category, while it is reliable and has a Russian-language interface, and the firmware allows the use of local resources.

You decided to purchase a Wi-Fi router Netgear,took it out of the box and now it lies before you. Look at it more attentively - there are a number of indicators in front of the router panel, which, during operation, give a signal about network events. This means that you can connect up to four of your computers to the Netgear router. And do not forget that it is possible to connect several Wi-Fi devices to the Wi-Fi router, because there is a wireless antenna for this.

How to connect a Netgear router. Instructions

  • You must configure the connection of the routerNetger to your internet. It is necessary in the router management program, select the item "Installation", then "Basic settings". In order to configure the Internet through DHCP, select the item "You need to enter connection information when connecting" and set "No".
  • You do not need to fill out the "Account name" field andthe Domain Name field. In order to configure Netgear in DHCP mode, you need to activate the option "Receive from the Internet provider" the IP address, select the same value in the "Domain Name Server (DNS) Address" menu.
  • Then go to the menu "RouterMAC addresses ", enter the address of the computer. Or you can set the address of the router, which can be found on the label, on the bottom of the router. Then click on the "Apply" button, in order to save the settings.
  • Then you need to check the settings made,then go to "Save", select "Router Status". The "Internet port" item shows the connection of the router to the Internet and the address from your provider. Now the configuration of the router is complete.
  • Next, configure the router for the PPTP connectionVPN. Go to the "Installation" and "Basic Settings". In the "Connection method" menu, you must select PPTP, in the "User name" the login that is in your contract with the provider, similarly fill in the "Password" field.
  • In the "My IP-address" you need to specify the address,which was given to you under the contract. The values ​​from the contract must be filled in the "Subnet Mask" field, the "Server address" field, the "Gateway address" field and the "DNS address" field. Enter your value (the address of the router) in the "MAC Router Router". Then click the "Apply" tab to save the settings.
  • Then configure the Netgear routing, selectpoints "Experienced", "Static Routers". Then fill in the table of routes that you need to know from your provider. To create rules in the table, click on the item "Add". Fill out the information from your contract (address, subnet mask, gateway address), tick the "Active" box and click the "Apply" tab.

How to configure a Wi-Fi router Netgear

  • In the "Settings" menu, go to "Wireless Network Settings". By default the name (SSID) is set to "NETGEAR", first enter any network name.
  • Then it will be in the list of wireless networks to which you connect, if you want to connect to the device via WiFi.
  • Then in the "Security Settings" select the type of encryption "WPA-PSK (TKIP) + WPA2-PSK (AES)" and in the field that appears enter the security key. All, click the "Apply" item.
  • Your wireless network is now password protected, and no one can connect to you.
Read more:
Comments 0