How do I remove the protective film?

Usually, the protective film is removed immediately afterinstallation of the product. This is especially true in the case of plastic windows. And, it's about how to remove the protective film from the windows of PVC, we will first and foremost talk, and then tell you how you can remove the tint film from the car's glass and remove the protective film from the phones.

How to remove the film from the window

The problem arises when the buildersafter the delivery of the house or too lazy, or just forgot to remove the film from the plastic windows. Here we will need special means and patience. The fact is that it is impossible to remove the film simply because after exposure to the protective coating of solar ultraviolet radiation even for several weeks, it can be removed only mechanically. Lucky for those who have as a protective film on the frames of ordinary scotch - it can be fully molded, and the remnants removed with the help of a liquid to remove varnish. If you have a protective film of a different type, then you can do this. First, wet the film with a special solvent, only not too corrosive, so that it is not harmful to the plastic from which the frames are made. Appropriate, for example, "White spirit", and some experts for this purpose even recommend the use of ordinary vodka or alcohol. Well - an excellent application for strong alcoholic beverages. Prepare for the fact that it will not be necessary to impregnate the film more than once before it can be scraped off. Try to make at least small "gaps" in the film, so that the solvent begins to interact with the glue. For scraping, you can use a thin spatula. By the way, in no case do not use to remove the film cosmophen, because it can melt the plastic profile.

How to remove film from glass

It is, of course, a tint film oncar glass. Recently, this issue arises quite often due to the fact that road policemen are actively fighting drivers who tint the windows of their cars. To remove the film from the car - or rather, from the glass of the car, you need to do this. First you should warm the glass with a regular hair dryer. The main thing in this case is not to bring a hairdryer close to the most toning, since a hair dryer can start to junk or stop working altogether. The optimal distance is 8-10 centimeters, not closer. For the removed glasses the variant with hot water in which they need to be lowered will approach. After the glass is heated, proceed to remove the film. It is desirable to remove the film quickly and, if possible, together with the glue, because once the glass has cooled, the film will be removed almost unreal and it will be necessary to heat the glass again. After removing the tint film, wipe the glass with white spirit or acetone to remove the glue residues. It is best to remove the glass before the procedure for removing the toning, since caustic substances can get on other elements of the door. The last stage consists in wiping the glasses with a special liquid to clean the mirrors and glasses. If you cleaned the car glass from the tint film this way was not possible (which is unlikely), in the car dealer you can buy a special liquid that you only need to apply to the removed glass. After the toning has softened, wash the glass with warm water, adding some detergent to the water, then wipe it dry.

How to remove film from phone

Of all the cases with protective films this one is the mostplain. Typically, the removal of film in the screen of portable communication devices is not very difficult. If the film is stuck tight enough, you can try to pick it up from some edge. If it starts to peel off, it will be easy to remove, if not - do not take risks, especially if you have a device with a touch screen. It is very easy to damage it, but the film does not interfere with normal operation, by and large. Moreover, after some time she will start to get unstuck anyway. And do not use any liquids to remove it, so you can damage the screen so that it just stops showing anything, so just wait until the film starts to go off by itself - then it will be very easy to remove it.